Spring 2025 Mechanical Engineering

Location: 2039 ERF; Phone: (312) 996-5317. For each course in the Department of Mechanical and Industrial Engineering, first priority in enrollment will be given to engineering or stat/or students in either the undergraduate or graduate college for whom the course is required or is a specified elective. Other studentswho meet prerequisites may be admitted by college approval during late registration.

Last generated: Monday, May 05 2025 09:44 AM CDT

NOTE: 500 level courses require graduate standing

ME 205

Introduction to Thermodynamics

3 hours. Prerequisite(s): PHYS 141 and MATH 181.

CRNCourse TypeStart & End TimeMeeting DaysRoomBuilding CodeInstructorMeets BetweenInstructional Method
38129LCD09:00 AM - 09:50 AMMWF1382SESPourarian, SMeet on campus
Restricted to Engineering or Provost & VC Acad Affairs.
15795LCD02:00 PM - 02:50 PMMWFD0022LCDManafzadeh, SMeet on campus
Restricted to Engineering or UIC Extended Campus.

ME 210

Engineering Dynamics

3 hours. Prerequisite(s): CME 201.

CRNCourse TypeStart & End TimeMeeting DaysRoomBuilding CodeInstructorMeets BetweenInstructional Method
15796LCD10:00 AM - 10:50 AMMWF10232ERFManafzadeh, SMeet on campus
Restricted to Engineering or UIC Extended Campus.
38130LCD12:00 PM - 12:50 PMMWF10232ERFManafzadeh, SMeet on campus
Restricted to Engineering or Provost & VC Acad Affairs.

ME 211

Fluid Mechanics I

4 hours. Prerequisite(s): PHYS 141 and MATH 220. Restricted to Engineering or UIC Extended Campus. To be properly registered, students must enroll in one Laboratory and one Lecture-Discussion.

CRNCourse TypeStart & End TimeMeeting DaysRoomBuilding CodeInstructorMeets BetweenInstructional Method
21436LAB - AB108:00 AM - 09:50 AMT32802SELEAnand, S; Jung, EMeet on campus
21437LAB - AB210:00 AM - 11:50 AMT32802SELEAnand, S; Jung, EMeet on campus
34951LAB - AB312:00 PM - 01:50 PMT32802SELEAnand, S; Jung, EMeet on campus
21438LAB - AB402:00 PM - 03:50 PMT32802SELEAnand, S; Jung, EMeet on campus
21434LCD - AS101:00 PM - 01:50 PMMWF10232ERFJung, EMeet on campus
38070LCD - AS202:00 PM - 02:50 PMMWF10032ERFAnand, SMeet on campus

ME 250

Introduction to Engineering Design and Graphics

3 hours. Prerequisite(s): Eligibility to register for ENGL 160. Restricted to Engineering, Graduate College, or UIC Extended Campus. To be properly registered, students must enroll in one Laboratory and one Lecture.

CRNCourse TypeStart & End TimeMeeting DaysRoomBuilding CodeInstructorMeets BetweenInstructional Method
33172LAB - AB110:00 AM - 10:50 AMMW32942SELESzwalek, JMeet on campus
Mechanical Engineering Lab Fee $50.00 Flat Fee.
15805LEC - AL109:00 AM - 09:50 AMMWF32942SELESzwalek, JMeet on campus
35051LAB - BB104:00 PM - 04:50 PMMW32942SELESiow, YMeet on campus
Mechanical Engineering Lab Fee $50.00 Flat Fee.
35050LEC - BL103:00 PM - 03:50 PMMWF32942SELESiow, YMeet on campus
15802LAB - CB112:00 PM - 12:50 PMMW32942SELEAbiade, JMeet on campus
Mechanical Engineering Lab Fee $50.00 Flat Fee.
36292LEC - CL111:00 AM - 11:50 AMMWF32942SELEAbiade, JMeet on campus

ME 261

Materials for Manufacturing

2 hours. Same as CME 261. Credit is not given for ME 261 if the student has credit for CME 260. Prerequisite(s): CHEM 122 and CHEM 123 and PHYS 141 and MATH 181. Restricted to Engineering, Graduate College, or UIC Extended Campus.

CRNCourse TypeStart & End TimeMeeting DaysRoomBuilding CodeInstructorMeets BetweenInstructional Method
24298LCD02:00 PM - 02:50 PMMWF1302SESKarpov, EMeet on campus

ME 293

Special Problems

1 TO 4 hours. May be repeated. Prerequisite(s): Consent of the instructor.

CRNCourse TypeStart & End TimeMeeting DaysRoomBuilding CodeInstructorMeets BetweenInstructional Method
31473CNFARRANGEDAbiade, JMeet on campus
Departmental Approval Required
11896CNFARRANGEDBhounsule, PMeet on campus
Instructor Approval Required
21048CNFARRANGEDBrezinsky, KMeet on campus
Instructor Approval Required
11890CNFARRANGEDCetin, SMeet on campus
Instructor Approval Required
11914CNFARRANGEDFinan, JMeet on campus
Departmental Approval Required
11887CNFARRANGEDGhashami, MMeet on campus
Departmental Approval Required
41690CNFARRANGEDJung, EMeet on campus
Departmental Approval Required
41708CNFARRANGEDKim, MMeet on campus
Departmental Approval Required
44592CNFARRANGEDKomperda, JMeet on campus
Departmental Approval Required
21050CNFARRANGEDLilley, CMeet on campus
Departmental Approval Required
11904CNFARRANGEDManafzadeh, SMeet on campus
Departmental Approval Required
11906CNFARRANGEDMegaridis, CMeet on campus
Departmental Approval Required
11888CNFARRANGEDMirbod, PMeet on campus
Departmental Approval Required
42681CNFARRANGEDSankaranarayanan, SMeet on campus
Departmental Approval Required
11915CNFARRANGEDScott, MMeet on campus
Departmental Approval Required
11916CNFARRANGEDShabana, AMeet on campus
Departmental Approval Required
39397CNFARRANGEDSubramanian, AMeet on campus
Instructor Approval Required Departmental Approval Required
11899CNFARRANGEDYarin, AMeet on campus
Departmental Approval Required

ME 308

Mechanical Vibrations

3 hours. Same as CME 359. Prerequisite(s): CS 109; and ME 210; and MATH 220. Restricted to Engineering or UIC Extended Campus.

CRNCourse TypeStart & End TimeMeeting DaysRoomBuilding CodeInstructorMeets BetweenInstructional Method
35710LCD09:00 AM - 09:50 AMMWF10332ERFNicolsen, BMeet on campus
15806LCD01:00 PM - 01:50 PMMWF10332ERFSiow, YMeet on campus

ME 312

Dynamic Systems and Control

3 hours. Same as IE 312. Prerequisite(s): CS 109 and ECE 210 and MATH 220; and sophomore standing or above; or approval of the department. Restricted to Engineering or UIC Extended Campus.

CRNCourse TypeStart & End TimeMeeting DaysRoomBuilding CodeInstructorMeets BetweenInstructional Method
19567LCD12:30 PM - 01:45 PMTR10232ERFShabana, AMeet on campus
35719LCD04:00 PM - 04:50 PMMWF10032ERFCetin, SMeet on campus

ME 320

Mechanisms and Dynamics of Machinery

3 OR 4 hours. Prerequisite(s): ME 210. Restricted to UIC Extended Campus, Engineering, or Graduate College. Restricted to Undergrad - Chicago.

CRNCourse TypeStart & End TimeMeeting DaysRoomBuilding CodeInstructorMeets BetweenInstructional Method
15808LCD02:00 PM - 03:15 PMTRF0032LCFBrown, MMeet on campus
3 hours

ME 321

Heat Transfer

4 hours. Prerequisite(s): ME 205 and credit or concurrent enrollment in ME 211. Restricted to Engineering, Graduate College, or UIC Extended Campus. To be properly registered, students must enroll in one Laboratory and one Lecture-Discussion.

CRNCourse TypeStart & End TimeMeeting DaysRoomBuilding CodeInstructorMeets BetweenInstructional Method
15809LAB - AB108:00 AM - 09:50 AMR32792SELEAnand, S; Jung, EMeet on campus
15810LAB - AB212:00 PM - 01:50 PMT32792SELEAnand, S; Jung, EMeet on campus
33176LAB - AB310:00 AM - 11:50 AMT32792SELEAnand, S; Jung, EMeet on campus
36797LAB - AB508:00 AM - 09:50 AMT32792SELEAnand, S; Jung, EMeet on campus
36798LAB - AB610:00 AM - 11:50 AMR32792SELEAnand, S; Jung, EMeet on campus
15812LCD - AS102:00 PM - 02:50 PMMWF10232ERFJung, EMeet on campus
37327LCD - AS211:00 AM - 11:50 AMMWF10032ERFAnand, SMeet on campus

ME 325

Intermediate Thermodynamics

3 hours. Prerequisite(s): ME 205 and credit or concurrent registration in ME 211. Restricted to Engineering, Graduate College, or UIC Extended Campus.

CRNCourse TypeStart & End TimeMeeting DaysRoomBuilding CodeInstructorMeets BetweenInstructional Method
38817LCD09:00 AM - 09:50 AMMWF10032ERFGhashami, MMeet on campus
15813LCD11:00 AM - 11:50 AMMWF10232ERFLynch, PMeet on campus

ME 328

Numerical Methods in Mechanical Engineering

3 hours. Previously listed as ME 428. Extensive computer use required. Prerequisite(s): CS 109 and Credit or concurrent registration in MATH 310. Open only to juniors and seniors. Restricted to Engineering or SVP Acdmc Prgrms Stdnt Succ. Restricted to students with Junior or Senior class standing.

CRNCourse TypeStart & End TimeMeeting DaysRoomBuilding CodeInstructorMeets BetweenInstructional Method
48025LCD11:00 AM - 11:50 AMMWF3092BHPourarian, SMeet on campus
48020LCD12:00 PM - 12:50 PMMWF3092BHPourarian, SMeet on campus

ME 341

Experimental Methods in Mechanical Engineering

3 hours. Prerequisite(s):CME 203; and ME 211. Restricted to Engineering, Graduate College, or UIC Extended Campus. To be properly registered, students must enroll in one Laboratory and one Lecture.

CRNCourse TypeStart & End TimeMeeting DaysRoomBuilding CodeInstructorMeets BetweenInstructional Method
15815LAB - BB10:30 AM - 12:50 PMR32802SELESzwalek, JMeet on campus
15817LAB - BB103:30 PM - 05:50 PMR32802SELESzwalek, JMeet on campus
41789LAB - BB201:00 PM - 03:20 PMF32802SELESzwalek, JMeet on campus
42375LAB - BB310:30 AM - 12:50 PMF32802SELESzwalek, JMeet on campus
34391LAB - BB408:00 AM - 10:20 AMR32802SELESzwalek, JMeet on campus
15816LAB - BB501:00 PM - 03:20 PMR32802SELESzwalek, JMeet on campus
39949LAB - BB708:00 AM - 10:20 AMF32802SELESzwalek, JMeet on campus
36800LEC - BL04:00 PM - 04:50 PMMWD0012LCDSzwalek, JMeet on campus

ME 347

Engineering Design and Graphics with Computer-Aided Design and Simulation

3 hours. Previously listed as ME 447. Extensive computer use required. Prerequisite(s): MATH 220 and CME 203 and ME 250. Recommended background: Credit in MATH 310. Restricted to Engineering. To be properly registered, students must enroll in one Laboratory-Discussion and one Lecture.

CRNCourse TypeStart & End TimeMeeting DaysRoomBuilding CodeInstructorMeets BetweenInstructional Method
39389LBD - AA108:00 AM - 09:50 AMR10832ERFHatami Marbini, HMeet on campus
Mechanical Engineering Lab Fee $6.00 Flat Fee.
39390LBD - AA210:00 AM - 11:50 AMR10832ERFHatami Marbini, HMeet on campus
Mechanical Engineering Lab Fee $6.00 Flat Fee.
40126LEC - AL112:00 PM - 12:50 PMMW10032ERFHatami Marbini, HMeet on campus
39391LBD - BA12:00 PM - 01:50 PMR10832ERFSiow, YMeet on campus
Mechanical Engineering Lab Fee $6.00 Flat Fee.
39392LBD - BA102:00 PM - 03:50 PMR10832ERFSiow, YMeet on campus
Mechanical Engineering Lab Fee $6.00 Flat Fee.
43177LEC - BL10:00 AM - 10:50 AMMW10032ERFSiow, YMeet on campus

ME 370

Mechanical Engineering Design

3 hours. Prerequisite(s): CME 203 and ME 250. Recommended background: ME 230. Restricted to Engineering, Graduate College, or UIC Extended Campus.

CRNCourse TypeStart & End TimeMeeting DaysRoomBuilding CodeInstructorMeets BetweenInstructional Method
42477LCD01:00 PM - 01:50 PMMWF10032ERFBhounsule, PMeet on campus
33178LCD02:00 PM - 02:50 PMMWF3172BHFinan, JMeet on campus

ME 380

Manufacturing Process Principles

3 hours. Same as IE 380. Prerequisite(s): CME 203. Restricted to Civil Engineering or Computer Engineering or Computer Science or Electrical Engineering or Engineering Physics or Industrial Engineering or Mechanical Engineering or Chemical Engineering or Bioengineering or Electrical & Computer Engr or Engineering or Engineering Management or Geotechnical Engr & Geosci or Indust Engr & Operations Res or Materials Engineering or Stats & Operations Res or Summer Session or Bioinformatics major(s).

CRNCourse TypeStart & End TimeMeeting DaysRoomBuilding CodeInstructorMeets BetweenInstructional Method
15847LCD09:00 AM - 09:50 AMMWF10232ERFAbiade, JMeet on campus
42668LCD10:00 AM - 10:50 AMMWF2382SESShahbazian-Yassar, RMeet on campus

ME 391

Mechanical Engineering Practicum

1 hours. Satisfactory/Unsatisfactory grading only. May be repeated. A maximum of 1 hour awarded toward degree requirements. Prerequisite(s): Approval of the Department. Restricted to Engineering.

CRNCourse TypeStart & End TimeMeeting DaysRoomBuilding CodeInstructorMeets BetweenInstructional Method
46324PR01:00 PM - 01:50 PMMWFKomperda, JOff Campus Experience

ME 392

Undergraduate Research

1 TO 3 hours. May be repeated to a maximum of 6 hours. Prerequisite(s): Consent of the head of the department.

CRNCourse TypeStart & End TimeMeeting DaysRoomBuilding CodeInstructorMeets BetweenInstructional Method
31474CNFARRANGEDAbiade, JMeet on campus
Departmental Approval Required
11918CNFARRANGEDAggarwal, SMeet on campus
Departmental Approval Required
38602CNFARRANGEDAnand, SMeet on campus
Departmental Approval Required
36829CNFARRANGEDBhounsule, PMeet on campus
Departmental Approval Required
21058CNFARRANGEDBrezinsky, KMeet on campus
Departmental Approval Required
11921CNFARRANGEDCetin, SMeet on campus
Departmental Approval Required
11941CNFARRANGEDFinan, JMeet on campus
Departmental Approval Required
11937CNFARRANGEDGhashami, MMeet on campus
Departmental Approval Required
38601CNFARRANGEDHatami Marbini, HMeet on campus
Departmental Approval Required
41706CNFARRANGEDJung, EMeet on campus
Departmental Approval Required
41707CNFARRANGEDKim, MMeet on campus
Departmental Approval Required
11935CNFARRANGEDKomperda, JMeet on campus
Departmental Approval Required
37707CNFARRANGEDLi, LMeet on campus
Departmental Approval Required
21059CNFARRANGEDLilley, CMeet on campus
Departmental Approval Required
39932CNFARRANGEDLynch, PMeet on campus
Departmental Approval Required
21061CNFARRANGEDManafzadeh, SMeet on campus
Departmental Approval Required
11936CNFARRANGEDMegaridis, CMeet on campus
Departmental Approval Required
11919CNFARRANGEDMirbod, PMeet on campus
Departmental Approval Required
38599CNFARRANGEDPan, YMeet on campus
Departmental Approval Required
42680CNFARRANGEDSankaranarayanan, SMeet on campus
Departmental Approval Required
11942CNFARRANGEDScott, MMeet on campus
Departmental Approval Required
11943CNFARRANGEDShabana, AMeet on campus
Departmental Approval Required
11926CNFARRANGEDShahbazian-Yassar, RMeet on campus
Instructor Approval Required
40223CNFARRANGEDSiow, YMeet on campus
Departmental Approval Required
39398CNFARRANGEDSubramanian, AMeet on campus
Departmental Approval Required
33731CNFARRANGEDWilliams, QMeet on campus
Departmental Approval Required
36827CNFARRANGEDXu, JMeet on campus
Departmental Approval Required
11929CNFARRANGEDYarin, AMeet on campus
Departmental Approval Required

ME 397

Senior Design Il

2 OR 3 hours. Same as IE 397. Credit is not given for ME 397 if the student has credit for IE 444 or ME 444 or IE 445 or ME 445. Prerequisite(s): ME 396; or IE 396; and senior standing or above. Requires concurrent registration in ME 499 or IE 499. Restricted to Engineering.

CRNCourse TypeStart & End TimeMeeting DaysRoomBuilding CodeInstructorMeets BetweenInstructional Method
37339LCDARRANGEDBrown, MMeet on campus
38073LCDARRANGEDBrown, MMeet on campus
36801LCDARRANGEDKomperda, JMeet on campus
38597LCDARRANGEDKomperda, JMeet on campus

ME 401

Applied Stress Analysis I

3 OR 4 hours. 3 undergraduate hours. 4 graduate hours. Prerequisite(s): CME 203. Restricted to Engineering, Graduate College, or VP Enrollment Management.

CRNCourse TypeStart & End TimeMeeting DaysRoomBuilding CodeInstructorMeets BetweenInstructional Method
47247LCD12:00 PM - 12:50 PMMWF1382SESShahbazian-Yassar, RMeet on campus
3 hours
47248LCD12:00 PM - 12:50 PMMWF1382SESShahbazian-Yassar, RMeet on campus
4 hours

ME 415

Propulsion Theory

3 OR 4 hours. 3 undergraduate hours. 4 graduate hours. Prerequisite(s): ME 419 or the equivalent. Restricted to Engineering, Graduate College, or UIC Extended Campus.

CRNCourse TypeStart & End TimeMeeting DaysRoomBuilding CodeInstructorMeets BetweenInstructional Method
33271LCD12:30 PM - 01:45 PMTR2382SESBrezinsky, KMeet on campus
3 hours Restricted to Undergrad - Chicago.
33389LCD12:30 PM - 01:45 PMTR2382SESBrezinsky, KMeet on campus
4 hours Restricted to Graduate - Chicago or Graduate Non-Degree Chicago.

ME 426

Applied Combustion

3 OR 4 hours. 3 undergraduate hours. 4 graduate hours. Prerequisite(s): ME 325. Restricted to Engineering, Graduate College, or UIC Extended Campus.

CRNCourse TypeStart & End TimeMeeting DaysRoomBuilding CodeInstructorMeets BetweenInstructional Method
31455LCD02:00 PM - 03:15 PMTR32792SELELynch, PMeet on campus
3 hours Restricted to Undergrad - Chicago.
31903LCD02:00 PM - 03:15 PMTR32792SELELynch, PMeet on campus
4 hours Restricted to Graduate - Chicago or Graduate Non-Degree Chicago.

ME 445

Interdisciplinary Product Development 2

4 hours. Same as IE 445. Credit is not given for ME 445 if the student has credit in ME 396 or ME 397 or IE 396 or IE 397.Year-long (with IE/ME 444) project course. Prerequisite(s): IE 444 or ME 444; and senior standing or above; and consent of the instructor. Restricted to Engineering, Graduate College, or UIC Extended Campus. Departmental Approval Required

CRNCourse TypeStart & End TimeMeeting DaysRoomBuilding CodeInstructorMeets BetweenInstructional Method
31457LCD03:30 PM - 06:30 PMT15152SSBScott, MMeet on campus

ME 449

Microdevices and Micromachining Technology

0 TO 5 hours. Same as ECE 449. 4 undergraduate hours. 5 graduate hours. Laboratory. Prerequisite(s): ECE 347; or consent of the instructor. Restricted to Engineering, Graduate College, or UIC Extended Campus. To be properly registered, students must enroll in one Laboratory and one Lecture-Discussion.

CRNCourse TypeStart & End TimeMeeting DaysRoomBuilding CodeInstructorMeets BetweenInstructional Method
36704LAB - AB211:00 AM - 01:50 PMR32642SELESabino, JMeet on campus
Electric & Cmptr Engr Lab Fee $50.00 Flat Fee.
20876LAB - AB402:00 PM - 04:50 PMW32642SELESabino, JMeet on campus
Electric & Cmptr Engr Lab Fee $50.00 Flat Fee.
19209LCD - AS109:30 AM - 10:45 AMTRA0042LCAPaprotny, IMeet on campus
4 hours Restricted to Undergrad - Chicago.
23636LCD - AS209:30 AM - 10:45 AMTRA0042LCAPaprotny, IMeet on campus
5 hours Restricted to Graduate - Chicago or Graduate Non-Degree Chicago.

ME 494

Special Topics in Mechanical Engineering

3 OR 4 hours. 3 undergraduate hours. 4 graduate hours. May be repeated. Prerequisite(s): Consent of the instructor. Restricted to Engineering, Graduate College, or UIC Extended Campus.

CRNCourse TypeStart & End TimeMeeting DaysRoomBuilding CodeInstructorMeets BetweenInstructional Method
33578LCD03:30 PM - 04:45 PMTR180G2TBHHaefke, CMeet on campus
3 hours Combined Heat and Power Restricted to Undergrad - Chicago.
33579LCD03:30 PM - 04:45 PMTR180G2TBHHaefke, CMeet on campus
4 hours Combined Heat and Power Restricted to Graduate - Chicago or Graduate Non-Degree Chicago.
32346LCD03:30 PM - 04:45 PMTR10232ERFSankaranarayanan, SMeet on campus
3 hours Data Science &Machine Learning Restricted to Undergrad - Chicago.
32347LCD03:30 PM - 04:45 PMTR10232ERFSankaranarayanan, SMeet on campus
4 hours Data Science &Machine Learning Restricted to Graduate - Chicago or Graduate Non-Degree Chicago.

ME 497

Undergraduate Senior Design Thesis II

0 TO 8 hours. Same as IE 497. Credit only given to nondegree students. No graduation credit given to students enrolled in Engineering. Extensive computer use required. Field trips required at a nominal fee. Prerequisite(s): Consent of the instructor. Departmental Approval Required

CRNCourse TypeStart & End TimeMeeting DaysRoomBuilding CodeInstructorMeets BetweenInstructional Method
40408LCDARRANGEDBrown, MMeet on campus

ME 499

Professional Development Seminar

0 hours. Same as IE 499. Satisfactory/Unsatisfactory grading only. Prerequisite(s): Open only to seniors; and approval of the department. Must be taken in the student's last semester of study. Restricted to Mechanical Engineering major(s). Restricted to Bachelor of Science.

CRNCourse TypeStart & End TimeMeeting DaysRoomBuilding CodeInstructorMeets BetweenInstructional Method
38363LCD05:00 PM - 05:50 PMW2412ARCNicolsen, BMeet on campus

ME 504

Computer Aided Analysis of Multibody Systems I

4 hours. Prerequisite(s): ME 413 or consent of the instructor.

CRNCourse TypeStart & End TimeMeeting DaysRoomBuilding CodeInstructorMeets BetweenInstructional Method
39400LCD09:30 AM - 10:45 AMTR10232ERFShabana, AMeet on campus

ME 521

Heat Conduction

4 hours. Prerequisite(s): ME 321 or consent of the instructor.

CRNCourse TypeStart & End TimeMeeting DaysRoomBuilding CodeInstructorMeets BetweenInstructional Method
33279LEC04:00 PM - 05:15 PMMW32802SELEManafzadeh, SMeet on campus

ME 547

Advanced Concepts in Computer-Aided Engineering

4 hours. Prerequisite(s): ME 413 and ME 447.

CRNCourse TypeStart & End TimeMeeting DaysRoomBuilding CodeInstructorMeets BetweenInstructional Method
24396LCD02:00 PM - 03:15 PMMW32802SELEHatami Marbini, HMeet on campus

ME 591

Mechanical Engineering Internship

1 hours. Satisfactory/Unsatisfactory grading only. May be repeated. A maximum of 4 hours awarded toward degree requirements. Prerequisite(s): Approval of the Department. Restricted to Engineering or Graduate College.

CRNCourse TypeStart & End TimeMeeting DaysRoomBuilding CodeInstructorMeets BetweenInstructional Method
46326PRARRANGEDAbiade, JOff Campus Experience
46328PRARRANGEDAnand, SOff Campus Experience
46329PRARRANGEDBhounsule, POff Campus Experience
46330PRARRANGEDBrezinsky, KOff Campus Experience
46331PRARRANGEDCetin, SOff Campus Experience
46333PRARRANGEDFinan, JOff Campus Experience
46347PRARRANGEDGhashami, MOff Campus Experience
46335PRARRANGEDHatami Marbini, HOff Campus Experience
46338PRARRANGEDJung, EOff Campus Experience
46339PRARRANGEDKim, MOff Campus Experience
46340PRARRANGEDKomperda, JOff Campus Experience
46342PRARRANGEDLilley, COff Campus Experience
46343PRARRANGEDLynch, POff Campus Experience
46344PRARRANGEDMegaridis, COff Campus Experience
46345PRARRANGEDMirbod, POff Campus Experience
46351PRARRANGEDSankaranarayanan, SOff Campus Experience
46348PRARRANGEDScott, MOff Campus Experience
46349PRARRANGEDShabana, AOff Campus Experience
46350PRARRANGEDShahbazian-Yassar, ROff Campus Experience
46352PRARRANGEDSubramanian, AOff Campus Experience
46353PRARRANGEDXu, JOff Campus Experience
46354PRARRANGEDYarin, AOff Campus Experience

ME 594

Current Topics in Mechanical Engineering

4 hours. May be repeated. Prerequisite(s): Consent of the instructor.

CRNCourse TypeStart & End TimeMeeting DaysRoomBuilding CodeInstructorMeets BetweenInstructional Method
39828LCD09:30 AM - 10:45 AMMW32792SELEBhounsule, PMeet on campus
Control of Robotic Arms & Legs

ME 595

Mechanical Engineering Seminar

0 TO 1 hours. Satisfactory/Unsatisfactory grading only. May be repeated. Must be taken every semester by all registered MS and PhD students in Mechnical Engineering. Students taking the course for one credit hour submit reflective summaries of the presentations. Prerequisite(s): Graduate standing in mechanical engineering.

CRNCourse TypeStart & End TimeMeeting DaysRoomBuilding CodeInstructorMeets BetweenInstructional Method
24438CNF11:00 AM - 11:50 AMTHatami Marbini, HMeet on campus

ME 596

Independent Study

1 TO 4 hours. May be repeated to a maximum of 4 hours. Students may register in more than one section per term. Prerequisite(s): Consent of the instructor. Departmental Approval Required

CRNCourse TypeStart & End TimeMeeting DaysRoomBuilding CodeInstructorMeets BetweenInstructional Method
31478CNFARRANGEDAbiade, JMeet on campus
11945CNFARRANGEDAggarwal, SMeet on campus
38604CNFARRANGEDAnand, SMeet on campus
36833CNFARRANGEDBhounsule, PMeet on campus
21062CNFARRANGEDBrezinsky, KMeet on campus
11949CNFARRANGEDCetin, SMeet on campus
11968CNFARRANGEDFinan, JMeet on campus
37708CNFARRANGEDGhashami, MMeet on campus
33732CNFARRANGEDHatami Marbini, HMeet on campus
31477CNFARRANGEDJung, EMeet on campus
38360CNFARRANGEDKim, MMeet on campus
11962CNFARRANGEDKomperda, JMeet on campus
21063CNFARRANGEDLilley, CMeet on campus
11954CNFARRANGEDManafzadeh, SMeet on campus
11963CNFARRANGEDMegaridis, CMeet on campus
38603CNFARRANGEDMirbod, PMeet on campus
42679CNFARRANGEDSankaranarayanan, SMeet on campus
11969CNFARRANGEDScott, MMeet on campus
11970CNFARRANGEDShabana, AMeet on campus
11959CNFARRANGEDShahbazian-Yassar, RMeet on campus
39401CNFARRANGEDSubramanian, AMeet on campus
43482CNFARRANGEDWilliams, QMeet on campus
36832CNFARRANGEDXu, JMeet on campus
11960CNFARRANGEDYarin, AMeet on campus

ME 598

M.S. Thesis Research

0 TO 16 hours. Satisfactory/Unsatisfactory grading only. May be repeated. Prerequisite(s): Consent of the instructor.

CRNCourse TypeStart & End TimeMeeting DaysRoomBuilding CodeInstructorMeets BetweenInstructional Method
31480CNFARRANGEDAbiade, JMeet on campus
11973CNFARRANGEDAggarwal, SMeet on campus
38092CNFARRANGEDAnand, SMeet on campus
36836CNFARRANGEDBhounsule, PMeet on campus
21066CNFARRANGEDBrezinsky, KMeet on campus
11976CNFARRANGEDCetin, SMeet on campus
11996CNFARRANGEDFinan, JMeet on campus
44709CNFARRANGEDHaghighi, AMeet on campus
38091CNFARRANGEDHatami Marbini, HMeet on campus
38606CNFARRANGEDHuang, JMeet on campus
11983CNFARRANGEDJung, EMeet on campus
38361CNFARRANGEDKim, MMeet on campus
40012CNFARRANGEDKomperda, JMeet on campus
21067CNFARRANGEDLilley, CMeet on campus
11974CNFARRANGEDLynch, PMeet on campus
11990CNFARRANGEDMegaridis, CMeet on campus
11981CNFARRANGEDMirbod, PMeet on campus
11977CNFARRANGEDPan, YMeet on campus
42678CNFARRANGEDSankaranarayanan, SMeet on campus
11997CNFARRANGEDScott, MMeet on campus
11998CNFARRANGEDShabana, AMeet on campus
38093CNFARRANGEDShahbazian-Yassar, RMeet on campus
39402CNFARRANGEDSubramanian, AMeet on campus
38605CNFARRANGEDWilliams, QMeet on campus
36835CNFARRANGEDXu, JMeet on campus
11987CNFARRANGEDYarin, AMeet on campus

ME 599

Ph.D. Thesis Research

0 TO 16 hours. Satisfactory/Unsatisfactory grading only. May be repeated. Prerequisite(s): Consent of the instructor.

CRNCourse TypeStart & End TimeMeeting DaysRoomBuilding CodeInstructorMeets BetweenInstructional Method
31481CNFARRANGEDAbiade, JMeet on campus
12001CNFARRANGEDAggarwal, SMeet on campus
38094CNFARRANGEDAnand, SMeet on campus
36839CNFARRANGEDBhounsule, PMeet on campus
21070CNFARRANGEDBrezinsky, KMeet on campus
12013CNFARRANGEDBrown, MMeet on campus
12004CNFARRANGEDCetin, SMeet on campus
12020CNFARRANGEDChase, ZMeet on campus
12026CNFARRANGEDFinan, JMeet on campus
12031CNFARRANGEDGhashami, MMeet on campus
38095CNFARRANGEDHatami Marbini, HMeet on campus
12016CNFARRANGEDHuang, JMeet on campus
38607CNFARRANGEDJung, EMeet on campus
12005CNFARRANGEDKhalili Araghi, FMeet on campus
38609CNFARRANGEDKim, MMeet on campus
21071CNFARRANGEDLilley, CMeet on campus
12002CNFARRANGEDLynch, PMeet on campus
12021CNFARRANGEDMegaridis, CMeet on campus
38608CNFARRANGEDMirbod, PMeet on campus
12010CNFARRANGEDPaprotny, IMeet on campus
Departmental Approval Required
42677CNFARRANGEDSankaranarayanan, SMeet on campus
12027CNFARRANGEDScott, MMeet on campus
12028CNFARRANGEDShabana, AMeet on campus
38096CNFARRANGEDShahbazian-Yassar, RMeet on campus
40003CNFARRANGEDSubramanian, AMeet on campus
36838CNFARRANGEDXu, JMeet on campus
12018CNFARRANGEDYarin, AMeet on campus